PLEASE CAREFULLY READ BELOW BEFORE ORDERING.
This listing is for a pair of PLEX Valves to suit bikes with loads below 100kgs or bikes that have had the springs already uprated.
We do also have a Plex Valves and spring package on our site. The package is for bikes that have 100kgs or more of additional load (rider and accessories) on the bike.
*These will drop into a bike with standard springs, without the need to adjust the pre-load spacers.
**If your bike has had the fork springs uprated or changed, you will need to trim down your preload spacers to account for the PLEX Valves increasing the pre-load on the springs.
***At the checkout, please leave a detailed note explaining your riding style (adventure, rally, trail etc) and ability. We will also need to know the load you have on your bike over standard. This is rider weight plus any aftermarket accessories etc. If you have already uprated your springs please let us know what spring rates you have fitted, this will be taken into account when setting up your PLEX Valves
OVERSEAS CUSTOMERS - All import duty and associated fees charged by your countries customs is your obligation.
About PLEX Valves.
PLEX Valves are the ideal solution to the very limited tuning/valving issues caused by the old rod fork design. Simply remove your fork springs, drop in the PLEX Valves then put your springs back in. PLEX Valves have adjustable rebound and compression damping through a shim stack that acts in just the same manner as a good cartridge fork.
PLEX Valves use a modern style fork piston which gives us superior control of oil flow compared with other drop in valves. In fact for the majority of riders, there is no need to change your fork oil grade, disassemble your forks, modify them, or use stiffer springs. The only exception being, bikes exceeding 100kgs load.